Non-destructive testing technique was developed for embedded hardware using acoustic emission sensors. In this technique, AE sensor records the acoustic vibration generated by striking the embedded hardware with a hammer. The fixed state of the embedded hardware is judged from the vibration time of the embedded hardware recorded by the AE sensor and the frequency distribution of the acoustic signal. Mockup tests and FEM analysis were carried out in order to verify the effectiveness of the technique....
英字タイトル:
Embedded hardware inspection using AE sensor Part1 Mockup tests

Non-destructive testing technique was developed for embedded hardware using acoustic emission sensors. In this technique, the fixed state of the embedded hardware can be judged from the vibration time and the frequency distribution of the acoustic signal. In this report, we introduce inspection method and analysis method at site and the application result of JNFL by nondestructive inspection technology of embedded hardware using AE sensor....
英字タイトル:
Embedded hardware inspection using AE sensor Part2 Site inspection

The maintenance of valves used in nuclear facilities (check valves, ball valves, gate valves, butterfly valves, etc.) is carried out by daily checking and overhaul. However, it is not easy to diagnose the inside status of these valves such as open-close performance and internal leakage. In this report, our approaches are shown to develop valve diagnosis by acoustic measurement using AE (Acoustic Emission) sensor through test loop examinations and the field applications....
英字タイトル:
Development of valve diagnosis using AE sensor

Non-destructive testing technique was developed for embedded plates using phased-array ultrasonic testing (PAUT). The bending angle of their studs was quantitatively estimated by using the sector scan of PAUT, which is usually difficult by using conventional UT. In addition, this technique is capable of visualizing the weld shape of the stud by using the linear scan of PAUT. Mockup tests were carried out in order to verify the effectiveness of the technique....
英字タイトル:
Development of Testing Technique on Embedded Plates Using Phased-Array Ultrasonic Testing

In the reprocessing facility of Japan Nuclear Fuel Limited, we had advanced the plant walk-down to put all equipment in the facility under our management. Throughout the plant walk-down, SANGENSYUGI (Going to the fields and observing equipment directory to understand their actual conditions) was thoroughly upheld. The trigger of the plant walk-down is the revelation, occurred in August 2017, of the fact that a part of static devices of important equipment to safety had not been under the appropriate mainten...
英字タイトル:
The efforts or the improvements of maintenance activities in the Rokkasho Reprocessing Plant

Non-destructive evaluation technique was developed to identify the integrity of embedded hardware using digital hammering inspection with AE (Acoustic Emission) sensor. The inspection can diagnose the fixed state of the embedded hardware in terms of its natural frequency and vibration duration. Mockup tests were conducted to investigate the relationship between the change in vibration duration and the fixed state under various loads including external tensile loads and thermal loads when welding supports on...
英字タイトル:
Improvement of the efficiency of hammering inspection using AE sensor for embedded hardware 2

Non-destructive evaluation technique was developed for embedded hardware using hammering inspection with AE (Acoustic Emission) sensor. The integrity of the studs welded on the hardware is judged from both the vibration duration of the embedded hardware and the frequency analysis of the vibration signal. The hammering inspection has been applied to the reprocessing plant of JNFL (Japan Nuclear Fuel Limited) for three years and we are now planning the improvement of the efficiency of the inspection in variou...
英字タイトル:
Improvement of the efficiency of hammering inspection using AE sensor for embedded hardware